Schaerer Euroca 2, Руководство пользователя

Страница: 25 / 99

Indicating- and operating elements
BASE-2-02.03 Page 3-5
3.3 Error and display message
3.3.1 Machine blocked, no more drawing possible
If the following information appears on the display, any product delivery will be
blocked:
After switching on the machine all drinks drawing is blocked whilst the system
warms up ( approx. 5 min.).
Insert ground container. If this message is still shown, it might be a fault by the
microswitch:
)
Call your customer service!
The product key is stuck or dirty. Can be released by cleaning or pushing the key
again. If the fault can not be erased:
)
Call your customer service!
At this display message no product purchase is possible.
Run cleaning program. See chapter 3.5 in the instruction manual.
Refill fresh water tank with drink water and then push -key (only for machines
without fixed water connection)
Empty waste water tank and then press -key (only for machines without fixed
water connection)
All product keys have been blocked with the KEY BLOCK card.
The heating is defective.
)
Call your customer service !
The communication to an external unit has been interrupted. Check whether the
external units are connected to the power supply and are correctly connected to
the Euroca-2. But if that is the case, the display message will always be:
)
Call your customer service !
The communication to an external unit has been interrupted. Check whether the
external units are connected to the power supply and are correctly connected to
the Euroca-2. But if that is the case, the display message will always be:
)
Call your customer service !
The communication to an external unit has been interrupted. Check whether the
external units are connected to the power supply and are correctly connected to
the Euroca-2. But if that is the case, the display message will always be:
)
Call your customer service !
ª
selection locked
watertank empty
selection locked
waste watertank full
selection locked
comms.interrupted
selection locked
** LAN-Timeout **
selection locked
error account system
<<Button?>>
selection locked
selection locked
clean machine
selection locked
container n.i. place
selection locked
12:00 22.01.1999
selection locked
heating timeout
selection locked
heating