Schaerer Euroca 2, Руководство пользователя

Страница: 87 / 99

Product description of the Frigo
BASE-2-02.07 Page 7-7
7.5. COMMISSIONING AND SETTING UP THE FRIGO
7.5.1. First use
The Frigo is set up and commissioned by a customer service authorised by M.
SCHAERER AG.
See also Section 4.2.
7.5.2. Setting the temperature
1. Open the Frigo service door.
2. Setting the temperature :
2.1 Temperature warmer :
-Turn thermostat regulator anticlockwise.
2.2 Temperature colder :
-Turn thermostat regulator clockwise.
2.3 Temperature to basic setting :
-Turn thermostat regulator anticlockwise until the stop.
-Turn thermostat regulator clockwise up to the character " A ".
2.4 Temperature off :
-Turn thermostat regulator anticlockwise till the stop, Frigo is switched off.
3. Close the Frigo service door.
Note :
‹
The Frigo must be switched on at least an hour before use so that the
cooling circuit is fully operationally ready (3 - 5°C).
‹
Never put warm milk into the Frigo (refrigerator).
7.5.3. Set milk foam by means of air regulating valve
1. Open the service door of the Euroca II.
2. Adjusting the air regulation valve:
- Turn the adjusting screw on the air regulating valve clockwise (smaller
scale figure), the foam bubble formation is reduced, the milk foam is
finer.
- Turn the adjusting screw on the air regulating valve anticlockwise
(larger scale figure), the foam bubble formation is increased, the milk
foam has large bubbles.
3. Close the service door of the Frigo.