6)
A short touch in the keys + or - increase the duty to the injectors
( 2~14mS ).
7)
A long touch of + or - change the flash delay
8)
A long touch on Ok button, switch the flash bank.
9)
The Ok button en the injector test
Ignition modules Test
This function do NOT test ignition coil directly, allow test TFI,
modules and coils only when have incorporated the module.
The test generate 12v pulses with width between 6mS and
30mS. The idea is simulate the hall of distributors and so force
to the ignition modules to generate sparks. On this way you can
test the modules.
The signal out by
the pin COIL+ and must
be disconnected the
signal coming from ECU
With + and - keys ups
and down the charge time. The device generate an DWELL
angle of 50%. Press OK when is done.
29/36
