Flash:
The HMP has an output to turn on a 12v LED
light and up to 15w. The light will turn on for a few
milliseconds after the injector opens (0 ~ 14mS)
The intermittent lighting of the flash allows you to see
the spray resulting from the opening by means of the
stroboscopic effect. The flash on time is set in the setup section.
1)Connect
the injectors
as image show.
2)
RPM
: Choose RPM:
1000, 2000, 3000, 4000
3)
Timer
: Select the
test time (great for
measure
injectors.
0=No time limit (Best for cleaning).
4)
Duty
: Opening time, is a time from 2 to 14 milliseconds.
This question only will be shown when the Timer is active.
5)
Start working and appears on screen.
A.1)
Is testing injectors
A.2)
Seconds left of timer
B) Injectors current consumption
C) Duty, opening time of injectors
D) Flash, time difference from
injector opening and flash start.
E) Bank assigned to flash
28/36
