Each car have their own
phase map, the HMP1 can read it
with the engine rotating and store
into the internal memory for
generate the signal in the future.
This read have 4 different uses:
1)
Test if the CKP and CMP are working
2)
Check the timing belt assembly
3)
Compare different cars with same engine
4)
Store up to 4 read and generate in the future.
Screen:
A) The point Ai is 20
B) The point Ae es 40
C) Teeth amount
D) Missing Teeth
E) Cuts by turn
Pressing the + and - keys with a short touch will change the
displayed point of the intake map (Ai, Bi, Ci, Di etc). A long
touch will change the displayed point of the escape map (Ae,
Be, Ce, De etc) When you press the OK button the reading will
be recorded in memory, so it is necessary that the motor is
turning when you press OK. The report will first show the full
CMPi and then the full CMPe that the device has read, and you
can scroll through them with the + and - keys. After the report it
will ask you in which of the 4 memories you want to save the
reading (0 = does not record anything)
19/36
