ScanSoft KAI S POWER SHOW, Руководство пользователя

Страница: 45 / 69

The SORT Room 45
3. Click each thumbnail you want to add
to the selection.
To remove thumbnails from a selection:
1. Click the Subtract button.
2. Click each thumbnail you want to
remove from the selection.
To select all the thumbnails on the
desktop:
✤
Click the All button.
To clear all selections:
✤
Click the None button.
To invert a selection:
✤
Click the Inverse button.
All the thumbnails that were selected
are deselected, and all the unselected
thumbnails are selected.
Deleting Thumbnails from the
SORT Room Desktop
The Select control lets you change the
behavior of the cursor so that every time
you click a thumbnail, it’s deleted from
the desktop.
When you delete a thumbnail, it
disappears from the desktop, but the
original file remains unchanged on your
hard drive.
To delete a thumbnail from the desktop:
1. Click the Select control. A series of
buttons appears.
2. Click the Delete button.
3. Click the thumbnails you want to
delete.
4. Click the Standard button to reset the
cursor.
Command/Ctrl-Z or the Undo
command lets you undo a mistake,
with one level of undo. Refer to
“Undoing Operations” on page 15
for more on Undo.
Setting Thumbnail Size
You can adjust the size of thumbnails on
the desktop to make it easier to see them,
or, if you have a lot of content, you can
resize thumbnails to reduce clutter.
To set thumbnail size:
✤
Select a single thumbnail or a group
of thumbnails.
✤
Click the smallest size control to
reduce thumbnail size. Click again to
reduce thumbnail size further.
✤
Click the largest size control to
increase thumbnail size. Click again to
increase thumbnail size further.
✤
Click the middle size control to set
thumbnails to default size.
The None button.
Use the Size control to set the size of thumbnails
on the desktop.