C H A P T E R 1 0
Automate Your Work
Dragon NaturallySpeaking User’s Guide
132
the command will not work, since Paint does not accept keystrokes. Also, application-
specific commands will work only in the specific application for which they were defined.
New commands are saved only when you save your user files. If you are creating
several new commands, save your user files periodically. To do this, from the
NaturallySpeaking menu on the DragonBar, click Save User Files or say “Save User
Files.”
Creating Step-by-Step commands
To create a Step-by-Step command, begin by following the steps in
“Creating new commands” on page 128. Then do the following:
1
Select Step-by-Step in the Command Type list.
2
Select a type of step from the list in the lower-left corner of the
MyCommands Editor dialog box, as shown below.
There are eight different types of steps:
■
Keystrokes: Press one particular key.
TIP
Select a type of step
from the list.
