C H A P T E R 1 0
Automate Your Work
Dragon NaturallySpeaking User’s Guide
130
option, the Application list appears. If the application is currently open,
you can select it from the list. Otherwise, use the Browse button to
locate the application on your computer.
If your new command is application-specific and will work only in a
particular window within that application, click Window-specific in the
MyCommands Editor. Window-specific commands will be available in
the window you specify. When you select this option, the Window list
appears. If the window you want is not in the list, you must close the
MyCommands Text and Graphics dialog box, open the window you
want, and reopen the MyCommands Text and Graphics dialog box to
see the window listed.
8
Use the Command Type list to choose the type of command you want:
Text and Graphics, Step-by-Step, Macro Recorder, or Advanced
Scripting. (With Dragon NaturallySpeaking
®
Preferred, you can only
create Text and Graphics commands).
9
Create the content for your command—what you want the command to
do. This is done differently for each of the four types of commands. See
“Creating Text and Graphics commands” on page 130 or “Creating
Step-by-Step commands” on page 132. For information on Macro
Recorder commands or Advanced Scripting commands, see the Dragon
NaturallySpeaking
®
online Help.
Creating Text and Graphics commands
To create a Text and Graphics command, begin by following the steps
in “Creating new commands” on page 128. Then follow the procedure
described below.
