Scan-Graphics CF1000/44, Руководство по эксплуатации, Страница: 3 / 50

iii
Scangraphics warrants its Scanner Products against defective workmanship and
materials for a period of ONE (1) YEAR from date of shipment. Software and
MK35 Products are warranted for a period of Ninety (90) days from date of
shipment.
Scangraphic s must be advised in writing, during the warranty period, of any
defect or non-conformity within thirty (30) days after discovery of defect.
Products or components thereof shall not be returned for inspections, replacement,
or repair without the Buyer having first obtained a specific Return Material
Authorization (RMA) number from
Scangraphics , AND Scangraphics shall have
the final determination as to the existence and cause of the defect. Authorization
to return defective product must be received from the factory prior to shipping the
Product.
The Buyer shall bear the expense of returning the Product to the factory with the
subsequent return shipment charges paid for by
Scangraphics if, in the event such
defect or non-conformity is established by Scangraphics . Air filters, fuses, and
lamps are excluded from the provisions of this warranty. Scangraphics assumes
no responsibility for obsolescence of its Software. Software is furnished "AS IS"
without warranty of any kind and without any representation regarding quality,
performance, or suitability.
Scangraphics does not warrant the Software free
from defects or that the support services will correct all defects which might exist.
Scangraphics warrants for the benefit only of the Buyer, that the Scangraphics
Software shall conform in material respects to the Scangraphics Software User's
Manual provided by Scangraphics , except with respect to subsequent
modifications, if any, made by the Buyer.
This WARRANTY shall not apply to any Product or parts thereof rendered
defective by negligence, accident, or subjected to electrical, thermal, or
mechanical conditions in excess of the maximum values established by
Scangraphics specification; or misuse in handling, transportation, storage; or by
performance of repairs, installation, or alterations outside the factory except when
performed by
Scangraphics accredited service representatives. Scangraphics
reserves the right to inspect the Product on the premises of the Buyer or the third
party thereof. Inspection or repair at any location other than the
Scangraphics
factory if carried out by Scangraphics at the request of the Buyer shall be at the
then current published repair service labor rates plus reimbursement of applicable
travel costs.
Scangraphics may, however, at its sole option, perform repair of
Products in the Buyer's or third party's plant at Scangraphics ' expense.