Scan Coin SC 303, Руководство пользователя

Страница: 10 / 12

9
SC 303/313 – 050062-101_rev- 05
By-passing Automatic Stop
Normally, if no coins pass the coin detector for five seconds the rotating
disc stops and automatically reverses slightly before restarting. If no coins
pass during the next 15 seconds the disc will stop automatically.
• Hold down
CE
while switching on the machine.
The display will read
St0P 0
, indicating that the automatic stop
function has been switched off.
• Repeat this to re-engage the automatic stop function.
The display will now read
St0P 1
, indicating that the automatic stop
function has been switched back on.
Troubleshooting
WARNING!
Risk of electric shock!
Follow the “Safety Precautions” on page 3 .
WARNING!
Risk of jamming!
Follow the “Safety Precautions” on page 3 .
Blank display/Machine Does not Start
• If the display is blank when the machine has been switched on, check
the mains lead.
• If it is properly connected and the machine is still not working,
contact your SCAN COIN representative.
Too Few Coins in the Bag in the First Batch
The last batch from the previous count was not full.
• Press
B
and
CE
to reset the batch-register and recount the batch, see
“Batch Counting” on page 7 , step b.
Note!
If the right hand cover is removed from the machine, a function switch
stops the motor.