10
SC 303/313 – 050062-101_rev- 05
Maintenance
WARNING!
Risk of electric shock!
“Safety Precautions” on page 3
WARNING!
Risk of jamming!
Follow the
“Safety Precautions” on page 3
.
Cleaning
Clean the machine daily to prevent from accumulation of dirt, since this
may cause too many coins to be rejected.
Caution!
Only use cleaning materials and implements which do not scratch.
Cleaning the Coin Track
Clean the coin track at regular intervals to ensure high counting
performance.
1
2
3
1 Outfeed belt
2 Coin access block
3 Lever
a)
Remove the right hand cover.
b)
Raise the outfeed belt (1) to gain access to the coin track.
c)
Pull the lever (3) to remove the coin access block (2).
d)
Clean the coin track with a stiff brush.
e)
Replace the coin access block and the outfeed belt.
f)
Replace the right hand cover.
Changing Outfeed Belt
Change the outfeed belt when the machine has counted approximately
one million coins.
1
Lift
Press
1 Outfeed belt
a)
Set the coin diameter knob to minimum.
b)
Remove the right hand cover.
c)
Raise the outfeed belt (1).
d)
Lift the feed mechanism.
e)
Remove the old outfeed belt and exchange it for a new one.
f)
Replace the feed mechanism and the outfeed belt.
g)
Replace the right hand cover.
