background image

3

SC 303/313 – 050062-101_rev- 05

Safety Precautions

This guide contains hazard information which 

must

 be read by all users. 

The hazard information is presented as follows:

WARNING!

 

Risk of personal injury!

 

 

Warnings indicate a potential hazard to the health and safety 
of users. They clearly state the nature of the hazard and how 
to avoid it. The warning symbols appear at their points of 
application in this guide. 

Caution!

 

Cautions indicate a hazard to the machine, but 

not

 a danger to personnel. 

They clearly state how to avoid the hazard. They appear at their points of 
application in this guide.

WARNING!

 

Risk of electric shock!

 

Lethal voltages exist in the machine when connected to mains 
power. Make sure you disconnect the power cord before 
cleaning or servicing the machine.

WARNING!

 

Risk of electric shock!

 

The machine is of metal construction and must therefore 
always be earthed to the supply. Ensure that both the plug on 
the supply lead and the supply source are earthed. This is a 
requirement for this type of equipment and if not adhered to 
will contravene the national and international standards of 
Health and Safety in the work place.

WARNING!

 

Risk of jamming!

 

This machine contains moving parts and sharp edges. Always 
be careful. Do not touch the components inside the machine 
while it is running.

WARNING!

 

Risk of tipping! 

 

During bagging, do not exceed the load stated on the label (see 

“Warning Labels” on page 6

).

>>>

>>>

WARNING!

 

Risk of impaired hearing!

 

Use ear protectors while the machine is running.

WARNING!

 

Risk of jamming! 

 

Switch off and disconnect the machine before opening the 
right hand cover. A function switch stops the motor if the 
cover is removed but the motor can start if the switch is 
activated making it possible to get fingers caught.

WARNING!

 

Risk of entanglement!

 

 

Keep long sleeves, ties, necklaces and long hair that can get 
caught by belts or pulleys away from the machine when the 
right hand cover is removed. If the function switch is activated 
by mistake the motor may start.

Содержание SC 303













Отзывы: