manualshive.com logo in svg

SawStop JSS-120A60, Руководство пользователя, Страница: 7 / 100

Поделиться
Скачать
SawStop JSS-120A60 Скачать руководство пользователя страница 7

SawStop warrants to the original retail purchaser of a new Jobsite Saw Pro from an authorized 
SawStop distributor that the saw will be free from defects in material and workmanship for ONE 
YEAR from the date of purchase.

SawStop warrants to the original retail purchaser of a refurbished, demonstration or floor model 
Jobsite Saw Pro from an authorized SawStop distributor that the saw will be free from defects in 
material and workmanship for SIX MONTHS from the date of purchase.

This warranty does not apply to defects arising from misuse, abuse, negligence, accidents, normal 
wear-and-tear, unauthorized repair or alteration, or lack of maintenance. This warranty is void if the 
saw or any portion of the saw is modified without the prior written permission of SawStop, LLC, or 
if the saw is located or has been operated outside of the country where the authorized SawStop 
distributor from whom the saw was purchased resides.

Please contact SawStop to take advantage of this warranty. If SawStop determines the saw is 
defective in material or workmanship, and not due to misuse, abuse, negligence, accidents, normal 
wear-and-tear, unauthorized repair or alteration, or lack of maintenance, then SawStop will, at 
its expense, and upon proof of purchase, send replacement parts to the original retail purchaser 
necessary to cure the defect. Alternatively, SawStop will repair the saw provided the saw is 
returned to SawStop, shipping prepaid, with proof of purchase and within the warranty period.

SawStop disclaims any and all other express or implied warranties, including merchantability 
and fitness for a particular purpose. SawStop shall not be liable for death, injuries to persons or 
property, or incidental, consequential, contingent or special damages arising from the use of the 
saw.

This warranty gives you specific legal rights. You may have other rights, which vary from state to 
state.

WARRANTY

SawStop

®

 Jobsite Saw Pro 

|

 

7

Содержание JSS-120A60





































































































Отзывы:

Нет отзывов