SawStop JSS-120A60, Руководство пользователя, Страница: 69 / 100

MAXIMUM WORKPIECE DIMENSIONS
CUT DIMENSION
Max. Depth of Cut, Blade at 0
°
3-1/8”
Max. Depth of Cut, Blade at 45
°
2-1/8”
Max. Rip, Right of Blade (Extension Table Retracted) 13-1/2”
Max. Rip, Right of Blade (Extension Table Extended) 25-1/2”
Max. Rip, Left of Blade 9-1/2”
Do NOT use saw blades that have a lacquer coating on the teeth, blades with
depth-limiting shoulders, or blades with non-conductive teeth .
Do NOT use saw blades made of materials that are electrically non-conductive
(e .g . abrasive blades, blades with plastic hubs, etc .) (
see page 19 ) .
Turn off the main power switch, remove the lock out key, and then make sure
the blade is completely stopped before making any adjustments .
To avoid risk of injury, wear gloves when handling saw blades . Never wear
gloves when operating the saw .
Use the right blade for the job. Use wood-specific saw blades when cutting wood. Use
metal-specific saw blades when cutting metal.
Avoid overheating the tips of the saw blade teeth by keeping blade clean and sharp. Ensure
dust collection system is clean and free of debris. When cutting plastic, make sure material
feed rate does not cause plastic to heat up or melt.
i
i
SAW BLADE
CUTTING OPERATIONS
SawStop ® Jobsite Saw Pro
|
69