SawStop JSS-120A60, Руководство пользователя, Страница: 59 / 100

1
2
3
Place a straightedge across table and
extension table, parallel to rail.
Check for gap between extension table and
straightedge. If there is a gap, use a feeler
gauge to determine size. If gap less than
0.05” (1.3 mm), extension table aligned, so no
adjustment needed. If gap is larger than 0.05”
(1.3 mm), proceed to next step.
Use a pencil to mark the extension table
and rail in the same location for alignment
purposes in later steps, or make note of
where end of table meets rail ruler.
ALIGN EXTENSION TABLE
SawStop ® Jobsite Saw Pro
|
59