SATO S84NX Скачать руководство пользователя страница 95

Страница: 95 / 588

Connecting Interfaces

Available Interfaces

The product supports the following interfaces.

•

A product connected with multiple interface cables can continue to operate when

receiving data. However, you cannot receive data from more than one interface at a

time. Normally, do not use multiple interfaces at a time.

•

The product prints the received data in order of reception. The next received data is

stored in the receive buffer while the first data is printed.

(1) NFC
(2) Wireless LAN
(3) RS-232C
(4) LAN
(5) USB
(6) External signal (EXT)

•

The wireless LAN interface is optional.

•

The NFC interface supports the handover function that simplifies the Wi-Fi connection

setup with Android devices. In addition, the NFC interface can be used for changing

product settings with an Android device while the product is powered off and the power

cord is not connected.

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 95 / 588

Результаты поиска

Содержание S84NX

Отзывы: