SATO S84NX Скачать руководство пользователя страница 298

Страница: 298 / 588

[Build Version]

298

Available only for the combined direct thermal/thermal transfer model.

[Cleaning]

Shows the video of the cleaning method.
The items are as follows:

[Cleaning(Print head)]

Shows the video for cleaning the print head.

[Cleaning(Roller)]

Shows the video for cleaning the rollers, such as platen roller, pressure roller, and feed roller.

[Cleaning(Paper path)]

Shows the video for cleaning the routes for the media.

[Cleaning(Ribbon path)]

Shows the video for cleaning the routes for the ribbon.
Available only for the combined direct thermal/thermal transfer model.

[Replace Parts]

Shows the video for replacing the parts.
The items are as follows:

[Replace Printhead]

Shows the video for replacing the print head.

[Replace Platen]

Shows the video for replacing the platen roller.

[Replace Pressure roller]

Shows the video for replacing the pressure roller.

[Replace Feed roller]

Shows the video for replacing the feed roller.

[Replace Pressure plate]

Shows the video for replacing the pressure plate.

[Replace Fan filter]

Shows the video for replacing the fan filter.

[Build Version]

Shows the information and version of the product.

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 298 / 588

Результаты поиска

Содержание S84NX

Отзывы: