SATO S84NX Скачать руководство пользователя страница 281

Страница: 281 / 588

281

WIFI00xx.bin

Received data through wireless LAN.

•

You can print or delete the files created inside "hexdump/" of the product from [Log

Files] menu.

[Buffer Dump]

Save the receive buffer data to the product.
Available if you have set to [Disabled] in the [Hex Dump Mode] menu.

Press the [START] button (

button) on the startup screen to save the data to the product.

Save the receive buffer data to "buff/" in the product.

•

The data files of the receive buffer are created for each type of interface.

•

The details of the files created in "buff/" in the product are as follows:

LAN0001.bin

The contents of the receive buffer for LAN.

NFC0001.bin

The contents of the receive buffer for NFC.

PIPE0001.bin

The contents of the receive buffer for pipe.

SCI0001.bin

The contents of the receive buffer for RS-232C.

USB0001.bin

The contents of the receive buffer for USB.

WIFI0001.bin

The contents of the receive buffer for wireless LAN.

•

If you perform the [Buffer Dump] again, the existing file will be overwritten.

•

You can print or delete files from the [Log Files] menu.

[Log Files]

Manage the log files of the product.
The setting items are as follows:

[Copy]

Copy the log files of the product to the USB memory.
Available only if you have installed the USB memory.

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 281 / 588

Результаты поиска

Содержание S84NX

Отзывы: