SATO S84NX Скачать руководство пользователя страница 179

Страница: 179 / 588

179

[Interface] Menu

The following settings are available in the [Interface] menu:

•

(S84NX only) The [RFID] menu appears only for the RFID models.

[Network]

This menu is for using LAN and wireless LAN for the interface between the computer and the product.
The setting items are as follows:

[Settings]

Set the LAN or wireless LAN, or select the interface.

•

You cannot use LAN and wireless LAN at the same time. The wireless LAN function is

available only if you have installed the wireless LAN.

The setting items are as follows:

[LAN]

Set the IPv4, IPv6 or proxy for the LAN.
The setting items are as follows:

[IPv4]

Set IPv4 for the LAN.

•

After doing the settings, press the

button to enable the new settings. Press

the

button to cancel the new settings and return to the previous settings.

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 179 / 588

Результаты поиска

Содержание S84NX

Отзывы: