SATO S84NX Скачать руководство пользователя страница 260 | Manualshive

Страница: 260 / 588

SATO S84NX Скачать руководство пользователя страница 260

[Regional]

260

[System] Menu

The following settings are available in the [System] menu:

[Regional]

Set the display language, time zone, calendar and unit.
The setting items are as follows:

[Messages]

Set the display language.
Select the display language from the list.

[USB Keyboard]

Set the language for the USB keyboard connected to the product.
Select the USB keyboard layout from Western and Eastern European languages, Japanese, Chinese

and Korean.

•

Japanese, Chinese, and Korean only support a change in the layout of the keyboard.

The IME (Input Method Editor) is not compatible, so you cannot input hiragana,

katakana, or kanji.

[Locale]

Set the locale to be used in AEP (Application Enabled Printing) mode.
This setting determines the format of time, dates, numbers, prices, names of weekdays, months, etc.

in AEP applications.
Select the locale from the list.

«
...
258
259
260
261
262
...
»

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов