SATO S84NX Скачать руководство пользователя страница 169 | Manualshive

Страница: 169 / 588

SATO S84NX Скачать руководство пользователя страница 169

169

0 is the lightest and 99 is the darkest.

•

The changes to this setting are linked and are changed with each of the test print

settings in the [Tools] > [Test Print] menu.

[Start Online]

Select default mode when the product is powered on.
The options are as follows:
Enabled

The product powers on in Online mode.

Disabled

The product powers on in Offline mode.

[Feed After Error]

Set whether to automatically feed the media when recovering from an error and changing to Online

mode.
The options are as follows:
Enabled

Feed the media when changing to Online mode after recovering from an error.

Disabled

Do not feed the media when changing to Online mode after recovering from an error.
However, if [Feed At Power On] is set to [Enabled], the product feeds the media when it is

powered on and changes to Online mode.
Also, if [Auto Measure] is enabled, the product feeds the media when it changes to Online mode

for the first time after being powered on.

[Feed At Power On]

Set whether to automatically feed the media when the product is powered on.
The options are as follows:
Enabled

Feed the media when the product is powered on.

Disabled

Do not feed the media when the product is powered on.
However, if [Auto Measure] is enabled, the product feeds the media when it changes to Online

mode for the first time after being powered on.

[Finisher Feed]

Set the media feed amount for dispense stop. Set the media feed amount based on the print head

position of 0.

«
...
167
168
169
170
171
...
»

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов