SATO S84NX, Руководство оператора, Страница: 558 / 588

Media Size for Each Print Speed
558
Media Size for Each Print Speed
The minimum media length varies by the print speed setting.
Continuous
mode
Dispenser mode Dispense & Print
mode
Print
speed
(inches/
sec)
Minimum media
length (with
liner) (mm)
(Thermal transfer)
Minimum media
length (with liner)
(mm)
(Direct thermal)
Minimum media
length (with liner)
(mm)
Minimum media
length (with liner)
(mm)
2 9 13 18 37
3 9 13 18 37
4 9 13 18 37
5 11 13 18 37
6 13 13 18 37
7 15 13 18 37
8 17 13 18 37
9 20 13 18 37
10 23 13 18 37
11 27 13 18 37
12 31 16 18 40
13 35 20 20 44
14 40 25 25 49
15 44 29 29 53
16 50 35 35 59
• If using media smaller than the minimum size, the media will not stop at the right
position, causing a print misalignment.
• Do not send the print data with media size that is smaller than the minimum media
length, even when the sensor is disabled.
• The above minimum media length are valid only if the print position adjustment and
offset adjustment are set to 0 mm. The minimum media length changes when the print
position adjustment and offset adjustment are set to the value other than 0 mm.