manualshive.com logo in svg

SATO S84NX, Руководство оператора, Страница: 437 / 588

Поделиться
Скачать
SATO S84NX Скачать руководство пользователя страница 437

437

Maintenance

Cleaning the Product

Cleaning

A dirty print head or platen roller not only affects the print quality but also causes errors and

malfunctions. Clean the product periodically to keep it running reliably.

 

•

Do not power on or off the product, connect or disconnect the power cord while your

hands are wet. Doing so could cause an electric shock.

 

•

Disconnect the power cord from the AC outlet before you begin cleaning.
The print head and its surroundings are hot after printing. Wait until the product cools

down.

•

Touching the edge of the print head with your bare hand could cause injury.

•

Use our recommended cleaning products for cleaning. Do not clean with a hard object.

Doing so could cause damage.

•

Remove the media and ribbon before cleaning.

 

•

Contact your SATO reseller or technical support to purchase the cleaning kit, cleaning

sheets, and other of our cleaning products.

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов