manualshive.com logo in svg

SATO S84NX, Руководство оператора, Страница: 499 / 588

Поделиться
Скачать
SATO S84NX Скачать руководство пользователя страница 499

499

Error Message 1023 (NTP Error)

When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
 

To clear the error:

Press the 

 button (OFFLINE) or 

 button, or change the calendar setting.

Cause and Countermeasure

Reference

Cause

Could not connect to the time server and set

the date and time.

Countermeasure

◦

Confirm that the address of the time

server is correct.

◦

Confirm that there is a connection to the

time server.

◦

The calendar can be set manually and

operation can be resumed without NTP

functionality.

 

 

Time Server IP

Regional

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов