Satel KNX-BIN24, Руководство пользователя

Страница: 27 / 52

SATEL KNX-BIN24 25
Configuration for example shown in
Fig. 12
in ETS: Two-channel mode = No; Control
scheme = Type B.
Configuration for example shown in
Fig. 13
in ETS: Two-channel mode = Yes; Control
scheme = Type A.
Control channel
– events generated in the channel control lighting (Physical channel 1…8 /
Virtual channel 1…8 / Logic channel 1…4 / Timer channel 1…4). The field is available in
the case of one-channel control.
Dimming up: control channel
– events generated in the channel turn the lighting on and
dim it up (Physical channel 1…8 / Virtual channel 1…8 / Logic channel 1…4 / Timer
channel 1…4). The field is available in the case of two-channel control.
Dimming down: control channel
– events generated in the channel turn the lighting off and
dim it down (Physical channel 1…8 / Virtual channel 1…8 / Logic channel 1…4 / Timer
channel 1…4). The field is available in the case of two-channel control.
Which events from the above channels change the value of “FB 1: dimmer – Switch”
object and which change the value of “FB 1: dimmer – Dim relative” object is defined
by the scheme selected for the “Control scheme” parameter.
Dimming up: step value
– the value by which lighting will be brightened when an event is
generated in the control channel (“Control channel” or “Dimming up: control channel”) that
changes the state of the “FB 1: dimmer – Dim relative” communication object (100%…1%
Brighter, Stop - see Appendix “4-bit telegrams for dimming DOWN/UP”).