Satel KNX-BIN24, Руководство пользователя

Страница: 20 / 52

18 KNX-BIN24 SATEL
block, communication objects are enabled (the number of objects depends on the selected
function). A tab is displayed for configuration of the block (e.g. “1: Switch”) and linking it to the
channel or channels that will be used to control it (each function block can be controlled by
using events from any channel, and events from one channel can be used do control several
function blocks at the same time – see “Configuration examples”).
In the starting configuration of the module (ETS application file), 8 function blocks have
been defined that execute the switch function and are controlled by the short button
press events, activated in the physical channels of the module (A...H) - see “Starting
configuration”.
Shown below is the “General” tab for enabling functions in the module.
Number of function blocks
– number of the function blocks that can be enabled in the
module (0…20, default = 8, maximum = 20). The number of displayed “Function block
1…20” fields depends on selected value.
Function block 1…20
– you can select the function to be executed by the block:
Not used
– the function block will not be used.
Switch
– functionality of bistable switch or value transmitter. Selecting this function will
enable the “FB 1…20: switch – Short press (1-bit)” communication object and display
the “1…20: Switch” tab.
Edge
– the rising edge / falling edge events are used to control switching. Selecting this
function will enable the “FB 1…20: edge – Rising / falling (1-bit)” communication object
and display the “1…20: Edge” tab.
Dimmer control
– for stepless control of lighting. Selecting this function will enable the
“FB 1…20: dimmer – Switch” and “FB 1…20: dimmer – Dim relative” communication
objects and display the “1…20: Dimmer” tab.
Shutter control
– for stepless control of roller shutter. Selecting this function will enable
the “FB 1…20: shutter – Move up/down” and “FB 1…20: shutter – Stop/step up/down”
communication objects and display the “1…20: Shutter” tab.
Switching sequence
– sequentially switches the 1-bit communication objects on the KNX
bus. Selecting this function will enable the “FB 1…20: sequence – Object 1” and “FB
1…20: sequence - Object 2” communication objects and display the “1…20: Sequence”
tab.
Counter
– counts the events generated in the module channels. Selecting this function will
enable the communication objects “FB 1…20: counter: - Current value”, “FB 1…20: