Satel KNX-BIN24, Руководство пользователя

Страница: 34 / 52

32 KNX-BIN24 SATEL
Communication object value
Event No.
Sequence
step
Object 5 Object 4 Object 3 Object 2 Object 1
0 00000 0 0 0 0 0
1 00001 0 0 0 0 1
2 00011 0 0 0 1 1
3 00111 0 0 1 1 1
4 01111 0 1 1 1 1
5 11111 1 1 1 1 1
Description of parameters
Two-channel mode
– defines how to control the switching sequence:
No
– the two-channel mode disabled i.e. the switching sequence can be controlled by
using one channel. Short button press in the control channel will start the sequence
(switch the object state according to the selected type of sequence). Long press in the
control channel will change the switching direction (next step / previous step) - see
Fig. 16
. Default value.
Yes
– two-channel mode enabled i.e. the switching sequence can be controlled by using
two channels – see
Fig. 17
.
Control scheme
– in the case of two-channel mode, you can select:
Type A: button short pressing = change sequence
– short button press in the first
channel (“Control channel: previous step”) will trigger next step in the sequence. Short
button press in the second channel (“Control channel: next step”) will trigger previous
step in the sequence (see
Fig. 17-I
).
Type B: falling edge = change sequence state = change direction (1 = next / 0 =
previous)
– falling edge in the first channel (“Control channel: switching”) will start the
sequence (will trigger next / previous step in the sequence). State of the second
channel (“Control channel: direction”) defines switching direction in the sequence,
where: “1” = NEXT, “0” = PREVIOUS (see
Fig. 17-II
).
Depending on the selected scheme, another pair of fields that allows you to select control
channels is displayed in the tab (Type A: “Control channel: previous step” and “Control
channel: next step”; Type B: “Control channel: switching” and “Control channel: direction”).
The two-channel control can only be properly implemented when two different control
channels are selected.