Satel KNX-BIN24, Руководство пользователя

Страница: 10 / 52

8 KNX-BIN24 SATEL
the module is programmed without modifying the starting configuration, each physical
channel of the module will control one function block executing the bistable switch
function (ON / OFF).
The module starting configuration can be modified by the user at will.
Presented below (
Fig. 5
) is a block diagram with starting configuration in which physical
channels of the module receive electric signals from the physical inputs and convert them
into events handled by the module. In the starting configuration, short button press events
generated in each physical channel of the module (A – H) control one function block
(Function block 1…8: switch), and thus “ON” / “OFF” telegrams are sent to the KNX bus.