Satec PM172EH Series, Инструкция по установке и эксплуатации

Страница: 26 / 90

20 Chapter 4 Setup Menus
Chapter 4 Setup Menus
4. Chapter 4 Setup Menus
Instrument setup can be performed directly on the front panel using the setup
menus or via communications using PAS communication software, supplied with
your instrument. For information on using PAS, refer to the user documentation
provided.
++ Recommended method, + Possible, - Not possible
Setup Display PAS
Basic +
++
Communication port ++ +
User selectable options ++ +
Analog output, analog expander + ++
Digital inputs + ++
Timer + ++
Alarm/Event set points + ++
Pulsing output, pulse counter + ++
Log memory - ++
Data log - ++
Real time clock + ++
TOU system - ++
Assignable registers - +
Display ++ -
4.1 Basic Setup Menu
Î Î Î Î
This menu contains the basic configuration options which define the
general operating characteristics of your instrument, such as wiring mode,
input scales, the size of the RMS averaging buffer, etc. Table 4-1 lists the
basic setup options, their code names and applicable ranges.
Activate the middle window to scroll through the list of available options,
and then activate the lower window to set the option value.
To select and view a setup option:
9 Press to activate the middle window
9 Use the up/down arrow keys to scroll to the desired
option. The current value for this option appears in the
lower window.
To change the value of the selected option:
9 Press to make the lower window active.
9 Press the up/down arrow keys to scroll to the desired value.
9 Press to store the selected value, or press
to quit the menu.
SELECT
bASc
4L-n
ConF
SELECT
CHG
ENTER
bASc
ENTER
ENTER
ESC
SELECT