80
Cleaning
Recommended care
For best performance and reliable
usage, the analyzer requires periodic
cleaning.
Danger
Before beginning the cleaning process:
§
The analyzer must be disconnected
from the power source.
§
Allow the analyzer to cool down for
30 minutes.
§
Take care during cleaning not to spill
any liquid into the analyzer.
§
The I/O connections on the back of the
analyzer may not come into contact
with liquids.
§
Do not immerse the analyzer in water or
any other cleaning solution.
Regular cleaning of the analyzer with a
mild detergent and a soft cloth should
include the following:
§
Clean the outer surface of the analyzer.
§
Carefully remove and clean the pan
support and pan shield.
§
Keep all warning labels clean.
§
Wipe dust from the interior of the
stainless steel heater housing.
§
Remove and clean the recessed area
under the pan shield:
– Remove the pan support and pan
shield.
– Remove the two screws holding the
perforated plate.
– Be careful not to spill liquid or solid
debris down the center hole where
the balance pan receiver protrudes.
