Target Limits
The Target limit Menu provides a statistical process
control (SPC) feature that can be set to identify
when a tested sample is within or outside the desir-
able limits selected. If this feature is activated, a Pass
or Fail will be displayed after each test, indicating
the sample is within or outside the set limits; this
will also appear on the printout.
To turn the Target Limits feature on and to enter
limits:
§
Press the
8
key from the Program Menu to display
the Target Limits screen. The current target limits
are shown.
§
Press the
On|Off
soft key to toggle target limits: On
§
Press the
1
key to set the upper limit.
§
Press the
2
key to set the lower limit.
When all the parameters for target limits have been
changed, press the
Arrow
key to accept the changes.
The display will return to the Program Menu.
39
1 . U p p e r L i m i t 1 0 0 . 0 0 % M o i s t u r e
2 . L o w e r L i m i t 0 . 0 0 % M o i s t u r e
T a r g e t L i m i t s M e n u
D e f a u l t
On/off
0 5 / 0 1 / 2 0 1 1
0 2 : 2 4 P M
