Sartorius CAIS1, Руководство по эксплуатации

Страница: 76 / 164

Example 1 : Checkweighing samples with a target weight of 1250 g and a tolerance range from
-10 g to +30 g. The tolerance values should be entered as absolute values (lower and
upper tolerance limit).
Configuration: The “Checkweighing" application is selected using the setting
INPUT
/
TAR.MN.MX
, a printout has been set up (see “Configuration").
O
t
Start target value and tolerance entry using the
O
key.
y
The target value symbol flashes at the top of the display.
t
Place a sample with the target weight (in this example, 1250 g) on the platform.
O
t
Save the target value.
y
The minimum symbol flashes at the top of the display.
1240
t
Enter lower limit value (in this example, 1240 g).
O
t
Save the lower limit value.
y
The maximum symbol flashes at the top of the display.
1280
t
Enter upper limit value (in this example, 1280 g).
O
t
Save the upper limit value.
y
Because the sample with the target weight is still on the weighing platform, the
weight is shown on the display with the checkweighing bars. The green LED
indicates a value in the target range.
t
Remove the sample with the target weight from the platform.
t
The samples can now be placed on the platform and checked one after the
other.
76 Operating Instructions Combics Indicators
Operation