Sartorius CAIS1, Руководство по эксплуатации

Страница: 35 / 164

17* Symbols for applications: An active application is identified by a line above and
below the symbol .
Application 1*:
A
“Counting"/ “Neutral Measurement"
B
“Weighing in percent"
V
“Averaging" (animal weighing)
Application 2*:
H
“Checkweighing"
W
“Classification"
Y
“Checkweighing toward zero"
Manually batching to a target value
Application 3*:
L
“Totalizing"
M
“Net total formulation"
18
a
The zero-setting symbol is displayed after the active scale or weighing
platform has been zeroed (verified models only)
19 +
-
Plus or minus sign of the value displayed
20
l
Busy symbol indicates that an internal process is in progress
* = for Combics 2 only
Menu Operating Design
Switching to the Menu
e
t
Turn on the device.
If it is already on: turn off and then on again.
) t
During the display test, briefly press the
)
key.
y
The menu will open. The top most level is always displayed ( “
APPLic.
"), menu
structure see page 135.
Navigating the Menu
You can navigate the menu using the keys with the white arrows under them.
(
Back to the superordinate menu level
k
Access the next menu item on the same level.
This continues to page through on the same level.
)
Press less
than 2 seconds: Select the menu item and save
Press longer
than 2 seconds: Exit the menu and switch to weighing mode
p
Print the menu settings starting from the current position,
or print Info data
Operating Instructions Combics Indicators 35
Operating Design