Sargent 2600 Series, Инструкция по установке

Страница: 18 / 36

17
Safety sensor active. A safety sensor is currently sending an impulse to the Door Operator.
(Presence Sensor, InfraRed Sensor, etc.)
Locking circuit active. An electric lock is currently sending an impulse to the Door Operator.
Non delayed impulse. An outside device, for example a push plate, is currently sending an impulse
to the Door Operator.
Delayed impulse. A delayed impulse device, for example a master door, is currently sending an
impulse to the slave Door Operator.
Inhibit non delayed impulse. Impulses from non delayed devices are currently inhibited; that is, not
being accepted by the Door Operator.
Signal dot. The signal dot is displayed when a Control Point has been selected using the “+”
button. The signal dot disappears when a Control Point has been selected, and validated by
pressing the “+” button.
DISPLAY LED’s
•
The RED LED is lit when an error condition has been detected. Refer to
Troubleshooting.
•
The yellow LED is lit when a Control Point is being adjusted.
•
The green LED is lit when the system is operating normally.
Right Display in previous view
The right display reports the status of system components by lighting individual line segments. If a line segment is
lit, the component is active; otherwise it is inactive.
Right
Display Status of System Components
DISPLAY LEDs