Sanyo SPW-C256VH, Технические данные и руководство по обслуживанию

Страница: 498 / 517

8
Address
Display on the
Remote Control
RCS-SH80BG.WL
Position of
receiver’s
(inside indoor
unit) address
switch
The position of the
receiver’s address
switch does not
matter.
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
RCS-TRP80BG.WL
Position of
receiver’s
(inside indoor
unit) address
switch
The position of the
receiver’s address
switch does not
matter. 1 2 3
4 5 6
1 2 3
4 5 6
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
1 2 3
4 5 6
RCS-SS80BG.WL
Position of
the operation
panel’s (inside
indoor unit)
address switch
The position of the
receiver’s address
switch does not
matter.
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
RCS-BH80BG.WL
Position of
the Receiver’s
Address Switch
The position of the
receiver’s address
switch does not
matter.
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
Setting Addresses (RCS-XM18BG.WL / K Types)
(Setting the address of the indoor unit)
1. First of all, set the address for the remote control with Setting Remote Control Address (See Page 8-7).
2. Press [Emergency Operation] of the indoor unit for four seconds or more.
When you do this, the lamps of the display will blink one after another.
3. Press on the remote control.
4. The buzzer will sound and the address of the indoor unit will change to the address displayed on the
remote control.
5. If you press [Emergency Operation] of the indoor unit once, the lamps on the indoor unit’s display
will turn off.
NOTE
• Please do not hold the [Emergency Operation] button of the indoor unit down while the indoor unit’s display
lamps are blinking one after another.
• Make sure to operate while the indoor unit is stopped.
• The address of indoor unit is set to “ALL” at the time of the shipment.
8-8
SM830160-03̲Classic̲PAC-i̲A4.ind8 8 SM830160-03̲Classic̲PAC-i̲A4.ind8 8 2010/02/16 10:31:17 2010/02/16 10:31:17