Sanyo PCS Vision RL-4920, Руководство пользователя

Страница: 37 / 258

End-of-Call Options
To display the following options, press
Options
(right softkey) within
10 seconds after disconnecting a call.
To select an option, highlight it and press .
Call Again
to dial the phone number.
Call:Speaker On
to dial the phone number in speakerphone mode.
Save Phone#
to save the phone number in your Contacts list.
Go to Phone Book
appears when the number is already in
your Contacts list. (See “Saving a Phone Number” below.)
Note: The End-of-Call options are not displayed for calls identified as No ID or
Restricted.
Saving a Phone Number
Your PCS Vision Phone can store up to 500 phone numbers in up to
300 Contacts entries (an entry may contain up to seven numbers).
Each entry’s name can contain 16 characters. Your phone
automatically sorts the Contacts entries alphabetically. (For more
information, see Section 2G: Using the Contacts Directory on
page 82.)
To save a number from standby mode:
1.
Enter a phone number.
2.
Press
Options
(right softkey).
3.
Highlight
Save Phone#
and press .
4.
Select a label by highlighting
Mobile
,
Home
,
Work
,
Pager
,
Fax
,
Other
, or
No Label
and press .
5.
Enter a name and press .
If you have already stored entries in the Contacts list, you are
prompted to select the following entry modes:
New Name
to enter a new name.
From Ph. Book
to select a name from the Contacts entry list.
6.
Press
Save
(left softkey).
After you have saved the number, the new Contacts entry is
displayed. (See “Contacts List Entry Options” on page 86.)
Section 2A: Your PCS Vision Phone – The Basics 25