Santerno SUNWAY M XS Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 148

background image

SUNWAY M XS 7500TL

INSTALLATION AND

PROGRAMMING INSTRUCTIONS

8/

148

1. SCOPE OF THIS MANUAL

Elettronica Santerno is committed to update its User Manuals available for download from

santerno.com

with

the latest software version officially released. Please contact Elettronica Santerno if you require technical
documents related to previous software versions.

2. GENERAL INFORMATION

2.1.

Description of the Product

The inverters of the SUNWAY M XS series are full-digital devices that convert DC energy produced by
photovoltaic (PV) panels – when radiated by sunlight – into AC energy, which is delivered to the grid.

A solar system for the self-generation of electric power is composed of two elements:

-

the PV generator, consisting of a set of PV panels;

-

the SUNWAY M XS inverter, delivering power supply from the PV generator to the grid.

Operation in parallel to the grid allows consumers  to exploit the power supply produced directly by the
system when radiated by sunlight, and to deliver power which is  not locally consumed to the grid, by
conferring it to the Grid Administrator. Therefore, residual power can be used by other consumers connected
to the grid, thus allowing the exploitation of the green energy produced by the PV generator, as well as the
constant operation of the same PV generator at its max ratings for optimum performance.
At night-time or when sunlight is weak, consumers can exploit the grid to power their loads.
All the parameter values related to the operation of the equipment may be easily programmed through the
touchscreen display and the parameter menus and submenus.
The  inverters of the SUNWAY M XS  series have been designed and manufactured in compliance with the
requirements of the “Low Voltage Directive” and the “Electromagnetic Compatibility Directive” and comply
with the prescriptions for grid connection applying to self-generation electric plants.

2.2.

Benefits

−

Wide range of supply voltages: 330 to 845 Vdc;

−

Full-digital DC/AC conversion through 32-bit microprocessor obtained with PWM technique and
IGBT bridge ensuring high efficiency, high reliability and low distortion of the grid current;

−

Transformerless topology;

−

Die cast aluminium enclosure for maximum robustness, thermal performance and weight
optimization, suitable for outdoor installation (IP65-rated);

−

DC disconnect switch ensuring maximum safety when maintaining the inverter (optional);

−

Input filters and output filters for the suppression of conducted disturbance and radiated disturbance;

−

Testing circuit to check the isolation resistance between the input and the earth;

−

Operation in parallel to the grid, power factor=1;

−

Fast connection through quick-coupling MC4 connectors for the connection of up to 4 strings;

−

User interface based on graphic touchscreen display, 240x320 pixels, 262,000 colours for user-
friendly control of the inverter functionality;

−

RS485 serial link with Modbus protocol for remote monitoring and programming (optional);

−

Wi-Fi connectivity for the access to LANs and interaction via smartphones;

−

Remote Technical Support if the inverter is connected to the Internet;

−

Power supply from the grid in order to maintain operation even in the event of weak solar radiation.

«
...
6
7
8
9
10
...
»

Содержание SUNWAY M XS





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для SUNWAY M XS

Бренд: YASKAWA Страницы: 4

Бренд: Rohde & Schwarz Страницы: 95

Бренд: M-system Страницы: 5

Бренд: Renkforce Страницы: 4

Бренд: DAD Страницы: 31

Blackbird 9140A-PCA

Бренд: Monoprice Страницы: 11

Бренд: Asian Electron Страницы: 16

FRENIC-Multi FRN0.1E1S-2LM1

Бренд: Fuji Electric Страницы: 33

Бренд: Motrona Страницы: 16

Бренд: Autonics Страницы: 6

Бренд: Diehl Страницы: 28

Бренд: Patton electronics Страницы: 20

Soltection RJ-1

Бренд: Vynckier Страницы: 12

Бренд: AUTLED Страницы: 2

Бренд: M-system Страницы: 2

CSI-5K-S22003-E

Бренд: CanadianSolar Страницы: 29

Бренд: Claind Страницы: 35

Бренд: YARMEE Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды