Sanremo CAFE RACER, Инструкция пользователя, Страница: 20 / 44

Use and maintenance instructions
CAFE’ RACER
GB
20
8.2- ELECTRICAL CONNECTION
•
The machine is connected to the mains power
supply by means of the power cable (2),
including a differential circuit breaker (3)
appropriately sized for the machine's power
absorption.
Connect the machine according to the wiring
diagrams in the figure
Equipotential connection (if present)
This connection (required by some standards)
prevents differences in electrical potential
between the earth connections of the devices
installed in the same room.
Machines designed for this type of connection
are provided with a specific terminal (4) on the
bottom of the machine.
• Connect an appropriately sized external
equipotential wire in compliance with current
regulations and standards to the corresponding
terminal (4).
G = Green B = Black
W = White Y/G = Yellow/Green
BL = Blue BR = Brown
• Make sure all switches are in the
OFF position before proceeding
with electrical connection of the
machine.
• The machine must be connected
to an earth installation complying
w i t h t h e s t a n d a r d s a n d
regulations in force in the country
concerned.
• Check that the machine voltage
(see rating plate) corresponds to
the voltage of the local mains
power supply.
• In single phase configuration,
the machine must be connected
to a power line with a maximum
impedance of (0.142+J0.089) Ohm.
Machines without an equipotential
connection terminal may not be
installed in kitchens.