Sanremo CAFE RACER, Инструкция пользователя, Страница: 18 / 44

Use and maintenance instructions
CAFE’ RACER
GB
18
8. CONNECTIONS
8.1 - WATER CONNECTION
• The machine is supplied with the drain and
water intake hoses already connected.
Drain
Near the machine there must be a drain (1) with
siphon.
• Connect one end of the shortest drain hose
(4) to the drain coupling on the machine (5) and
the other end to the coupling on the tray (3) and
fix with the hose clips (6).
• Connect one end of the longest drain hose (2)
to the coupling (3) on the tray and the other end
to the drain (1) prepared previously.
Filling
Filling (for version with built-in pump)
• Connect the intake hose (7) to a water
softener (8), interposing the water purifying filter
(9) supplied
• Install a splitter tap (10) before the water
softener (8), to separate the machine from the
mains water supply.
IMPORTANT: the machine must be
connected by a specialised
authorised technician.
The machine must be connected to a
mains water supply in compliance
with the standards and regulations
in force in the country where the
machine is to be operated and using
a new set of couplings.
The drain siphon must be located at
least 20 cm below the surface on
which the machine stands.
The machine must be connected to a
mains water supply providing
appropriately softened drinking water
with a maximum hardness of 3.5/5
French degrees (60/85 ppn). Make sure
the supply pressure does not exceed 6
bars (0.6 MPa). If the pressure is
greater, install a pressure reducer.