Sankosha DF-100E-V3 Скачать руководство пользователя страница 33

Страница: 33 / 62

Error No.

．

Error Item

．

Error Description

．

Check Point

E23

1 Rotation Button Error

2. Steam Button stays activated if the button is staying pushed by something when the main

power is ON, or the machine is at the original position.

．

(1) In the case of keep pushing the button, please release the button. Also, please remove

anything which is pushing the button. If you push the Reset button again, the machine
will return to its original position.

(2) Even if the button is not pushed, if it is showing "E23" error, it is a button problem.

Please check whether the switch is broken or a wire connection is loose or disconnected.

E24

1. Multi Function Foot Pedal Error

Multi Function Foot Pedal stays activated if the pedal is staying pressed by something when

the main power is ON, or the machine is at the original position.

．

(1) In the case of keep pushing button, please release the pedal. Also, please remove

anything which is pushing the pedal. If you push the Reset button again, the machine
will return to its original position.

(2) Even if the pedal is not pressed, if it is showing "E24" error, it is a switch (FP03)

problem. Please check whether the switch is broken or a wire connection is loose or
disconnected.

E25

1. Shoulder Expander Foot Pedal Error

2. Shoulder Expander Foot Pedal stays activated if the pedal is staying pressed by something

when the main power is ON, or the machine is at the original position.

3. (1) In the case of keep pushing button, please release the pedal. Also, please remove anything

which is pushing the pedal. If you push the Reset button again, the machine will return to
its original position.

(2) Even if the pedal is not pressed, if it is showing "E25" error, it is a switch (FP01) problem.

Please check whether the switch is broken or a wire connection is loose or disconnected.

E26

1. Body Down Foot Pedal Error
2. Body Down Foot Pedal stays activated if the pedal is staying pressed by something when

the main power is ON, or the machine is at the original position.

3. (1) In the case of keep pushing button, please release the pedal. Also, please remove anything

which is pushing the pedal. If you push the Reset button again, the machine will return to
its original position.

(2) Even if the pedal is not pressed, if it is showing "E26" error, it is a switch (FP04) problem.

Please check whether the switch is broken or a wire connection is loose or disconnected.

Содержание DF-100E-V3































































Результаты поиска

Содержание DF-100E-V3

Отзывы:

Бренды по названию

Популярные бренды

Sankosha DF-100E-V3, Инструкция по эксплуатации

Результаты поиска

Содержание DF-100E-V3

Отзывы:

Бренды по названию

Популярные бренды