Sankosha DF-100E-V3, Инструкция по эксплуатации

Страница: 19 / 62

19
（
6
）
Turn the body to the front side by using the rotation
button (auto), or rotation lever (manual)
(Please see the page 18 Figure-1.)
（ 7 ） Press the shoulder expander foot pedal.
→ Expander will expand according to garments shoulder line.
Straighten shoulder line if it is needed.
（
8
）
Straighten front placket and press the multi function pedal.
→
Front side of the garments will be clamped.(- 2 - is displayed)
＊ If the setting is not correct, push the reset button.
The machine will return to its previous position.
（
9
）
Press the multi function foot pedal.
→
Side expander will expand according to garments line.
(- 3 -is displayed)
＊ If the setting is not correct, push the reset button.
The machine will return to its previous position.
（ 10 ） Press the multi function foot pedal.
→ Left and right side will be clamped. (- 4 - is displayed)
＊ If the setting is not correct, push the reset button.
The machine will return to its previous position.
（
11
）
Press the multi function foot pedal.
→
The automatic operation will start.
＊
Auto operation procedure.
Steam Injection ⇒ Body going up (while Stretch Selection Switch being ON) ⇒ Steam/Blower
⇒
Blower (Dry)
・・・
(Time of each process is counted in display window )
→ When the finishing process is over, the front/rear clamp, the left/right clamp, and the body will stop
working.
（
12
）
Press the Multi Function Foot Pedal twice while holding the both sides of the shoulder of the
garment.
→ The first step releases the front/rear clamp and the left/right clamp. The second step makes the
body go down. You can then easily take off the garment.
＊ If you turn the DIP function “d 5” ON, all of the motions (releasing the front/rear clamp and
left/right clamp and the body going down) take place by using this only one step. (Please see
page 29)
Shoulder Expander Foot Pedal
Multi Function Foot Pedal
Tips!
Figure-5
Figure-6
Figure-7