Sankosha DF-100E-V3, Инструкция по эксплуатации

Страница: 20 / 62

20
≪
In case of the jumper finishing
≫
（ 1 ） Turn the body back with the rotation button (auto) or rotation lever (manual)
(It makes setting the garment easier.)
（
2
）
Change the Mode Selection Switch to the “Jumper Mode”.
（ 3 ） Set garment on the body and straighten its shoulder position.
（
4
）
Press Body up or Body down foot pedal.
→ Body will move up. Adjust body to correct garment
height with Body up and Body down foot pedal.
（
5
）
Turn the body to front side with the rotation button
(auto), or rotation lever (manual)
（
6
）
Press the shoulder expander foot pedal.
→
Shoulder area of the body will expand according to the
shoulder line. Straighten the shoulder position if it is needed.
（
7
）
Press the multi function foot pedal.
→
The front side will be clamped.(- 2 - is displayed)
＊
If the set is not correct, push reset button. The machine will return to its previous position.
（
8
）
Press the multi function foot pedal.
→
The automatic operation will start.
＊
Auto operation process.
Steam Injection ⇒ Body going up (while Stretch Selection Switch being ON) ⇒ Steam/Blower
⇒
Blower (Dry)
・・・
(Time of each process is counted in display window )
→ When the finishing process is over, the front/rear clamp, the left/right clamp, and the body stop
working.
（
9
）
Press the Multi Function Foot Pedal twice while holding the both sides of the shoulder of the
garment
→
The first step releases the front/rear clamp and the left/right clamp. The second step makes the
body go down. You can then easily take off the garment.
＊ If you turn the DIP function “d 5” ON, all of the motions (releasing the front/rear clamp and
left/right clamp and the body going down) take place by using this the only one step. (Please see
page 29)
Body Down Pedal
Body Up Pedal
Multi Function Pedal
Shoulder Expander Pedal
Mode Selection Switch
Tips!