SANKI MAGDRIVE CLAM, Руководство по эксплуатации и обслуживанию

Страница: 5 / 28

5
B. During Operation
C. After Use
NOTE ： 1. Always use in accordance with the Occupational Safety and Health Act.
2. If the owner modifies the conveyor, any ill effects will fall outside the conditions of the guarantee.
WARNING ：
Improper handling of the conveyor could result in serious physical injury or damage!
■ Do NOT touch the conveyor when it is running
There is considerable risk of being caught and injured by the conveyor.
■ Do NOT ride on or climb on the conveyor ／ Do NOT go under the conveyor
There is considerable risk of falling or being caught and injured by the conveyor.
■ Beware of entanglement
When working close to the conveyor, take care not to get caught in the conveyor. There is
considerable risk of being injured by the conveyor.
■ Do NOT remove safety covers
There is a risk of getting caught in the rotating parts such as pulleys. Only remove in case of
maintenance or inspection.
CAUTION ：
Improper handling of the conveyor may result in physical injury or damage!
■ Do NOT apply force to ends of conveyor
Do NOT press down on, or hang off the sides of the conveyor. Injury may result from a toppling
conveyor.
■ Toppling prevention
When using the conveyor, be sure to secure it to the floor/ground with anchor bolts etc. to
prevent it from toppling irrespective of indoor use or outdoor use.
■ Do NOT start the conveyor while it is loaded
The motor may become damaged due to overload. Additionally, the motors of variable-speed type
machines may burn out as a result of running at excessively low speeds for
long periods. Use the conveyor within the specifications, indicated in the instructions for use, and
in the catalogue.
■ Do NOT allow objects such as a pacemaker to get close to the magnets.
The magnets are attached to the carrying rollers and line shafts of conveyor. DO NOT allow
objects, which could be affected by magnetic fields, to approach within 5 cm of the magnets.
■ Switch off the power after use
Ensure that the power is switched off when carrying out relocation, inspection, cleaning, etc. of
the conveyor, otherwise there is a risk that the conveyor could start unexpectedly. When leaving
the conveyor unused for a long period, take plug out of the outlet /connector to prevent electric
shock or leakage.
CAUTION ：
Improper handling of the conveyor may result in physical injury or damage!