SANKI MAGDRIVE CLAM, Руководство по эксплуатации и обслуживанию

Страница: 4 / 28

4
□ When using in a high or inclined position:
FOR YOUR SAFE USAGE
1
CAUTION WHEN HANDLING
A. Prior To Use
CAUTION :
Improper handling of the conveyor may result in physical injury or damage!
■ Transport and assembly
When transporting and assembling the conveyor, pay special attention not to drop it in order to
avoid physical injury or damage. When lifting by crane, pay attention to the balance of the conveyor.
■ Earth and leakage breaker
Ensure the conveyor is connected to earth at all times to prevent electric shock. Also ensure that
an earth leakage breaker is connected to the power supply.
■ Emergency stop
Install an emergency stop device to immediately stop the conveyor in emergency.
■ Start alarm
If it is not possible to supervise the operation of the full length of the conveyor from the operating
position, install a start alarm for increased safety.
■ Keep the conveyor dry at all times
Use the conveyor indoors and prevent it from getting wet. Do NOT splash liquids onto the
conveyor. Do NOT use or leave the conveyor outdoors. The machine is not waterproof.
Do NOT touch electrical parts with wet hands.
■ Do NOT use in an explosive atmosphere
(Avoid explosive gas, explosive dust, etc.)
■ Lower cover and guard
Install the optional lower cover or guard in order to prevent entry under the conveyor.
■ Guide rail, top and side covers
To prevent objects from falling off the conveyor, install the optional guide rail, top and/or side
covers.
■ Environmental conditions
Ambient temperature
Ambient humidity
Atmosphere
Elevation
NOTE ：
● Using the conveyor in a strong electric field (eg near broadcasting devices or high- frequency welding
machinery/equipment) could cause the conveyor to malfunction. In this case, install the conveyor at a
sufficient distance. Alternatively shield completely to avoid any interference with the conveyor.
● Using an inverter to this machine could cause other machines to get effects of high-frequency. In this
case, install the conveyor at a sufficient distance or shield completely.
：0℃ to +40℃
： RH 90% max(Avoid condensation)
： Indoor(Avoid corrosive gases, dust, etc.)
： 1,000m or less
■ Do NOT allow objects such as a pacemaker to get close to the magnets
The magnets are attached to the carrying rollers and line shafts of conveyor. Do NOT allow objects,
which could be affected by magnetic fields, to approach within 5 cm of the magnets.