SANDVIK CH420:01 Скачать руководство пользователя страница 74

Страница: 74 / 110

5. Transport handling

CH420:01

5.6 Disposal/return of packaging material

The packaging material includes all pallets, crates, wrapping, boxes and
other protective material that are not part of the equipment. Packaging is
normally not returned to the manufacturer.

•

Check if there is a special agreement for the return of the packaging to
the manufacturer.

•

If the packaging must be returned, prepare an area to store pallets,
transport racks and any other returnable packaging.

•

Check if there is a special arrangement for recycling packaging material.

•

If the packaging is not to be returned or recycled, check with the local
authorities how to separate and dispose of packaging material.

•

Dispose of pollutant waste (bubble wrapping, plastic bags, expanded
polystyrene, etc.) in accordance with local regulations.

Содержание CH420:01















































































































Результаты поиска

Содержание CH420:01

Отзывы:

SANDVIK CH420:01, Руководство по установке, Страница: 74 / 110

Результаты поиска

Содержание CH420:01

Отзывы: