SANDVIK CH420:01, Руководство по установке

Страница: 72 / 110

5. Transport handling
70 © Sandvik SRP AB – Doc. no. S 223.510 en Ver. 1 CH420:01
5.4.2 Storage
CAUTION! Sandvik recommends storing the cone crusher indoors. Long-term ex-
posure to moisture or very high or low temperatures may damage the
cone crusher.
a) Prepare a storage area large enough to store the components with at least
1 m (3 ft) of free space around and above them for access and
ventilation.
b) Make sure that the storage area environment meets the conditions in the
table below:
c) Lift the components into position according to the instructions in section
5.4.1 Moving . If the ground/floor is uneven, place blocks or plates under
the components to provide a steady support.
d) Make sure that the components are stable before removing the lifting
equipment.
WARNING!
Hanging load
Keep clear of hanging loads. See section 2. Safety precautions .
Make sure that the SWL (Safe Work Load) of the lifting equipment is
sufficient for the weight to be lifted.
Characteristic Value Notes
Min–max temperatures 5–40 °C (41–104 °F)
Max relative humidity 80% Non-condensing
NOTE! Before delivery from the factory, the cone crusher and oil tank unit are
treated with rust preventatives sufficient for approximately 30 days of
storage. If the cone crusher is to be stored for a longer period, it must be
checked regularly and re-treated with rust prevention if necessary.