Sanden SN3500, Руководство по установке

Страница: 101 / 150

Appendix E: Checkout Procedures
82005-IM-K Sandel SN3500 Installation Manual Page 11-15
11.4 Introduction
The Flight Test Procedures described below are to be performed after both the
Post-Install Procedures and the Ground Test Procedures are performed.
Successful completion of the Flight Test Procedures will then satisfy the criteria
for operational acceptance of the SN3500 installation.
Specific procedures are not provided for many of the tests herein, due to
differences in installed options and aircraft configurations. Refer to the SN3500
Pilot’s Guide and the proposed Airplane Flight Manual Supplement for operational
details of the equipment.
Each test item is followed by a space for the initials of the person performing the
procedure, and a space for a description of any observations or anomalies.
Determination of a successful flight test is made after analysis of these
observations.
11.5 Test Procedures
11.5.1 Pre-Departure Operations
Apply power to the SN3500 and all associated equipment. Determine that all
equipment initializes and functions normally.
Verify that the SN3500 internal brightness control can control the brightness of the
SN3500 and that a satisfactory brightness level can be attained.
Completed _______ Comment __________________________________
Evaluate the display of the SN3500 for readability.
Completed _______ Comment __________________________________
Evaluate the intensity properties of the SN3500 display under both direct and
indirect sunlight conditions, and in nighttime operation conditions.
Completed _______ Comment __________________________________