Sanbot MAX, Руководство пользователя

Страница: 7 / 45

4
2. Please remove the two pieces of foam from the front and back of the Sanbot Max, and remove the plastic film covered on the Sanbot Max.
3. Unscrew the butterfly nuts (4 in total) on the left and right sides of wooden pallet, then force out screws (4 in total) with hammer or by hand.
4. Take out of the two fixed wood blocks which are fixed by butterfly nuts and screw, and place them on the side of pallet behind Sanbot Max to make a slope (Please notice
the position of hole)