Sanbot MAX, Руководство пользователя

Страница: 34 / 45

31
⑤
Prompt will be popped up when robot detects vision label, please click “confirm to add”;
⑥
Push robot to next place with vision label and click “confirm to add”when detecting vision and popping up a window;
⑦
If you want to delete a vision label , please select “delete vision label”and click corresponding label on the map.
⑧
After all vision labels are remarked, click “Then End Of The Marking” to back the main interface of the app;
Apply this map
Long press the map and choose “Apply this map”, the map is applied successfully after a prompt “Application of map(Success)/Has ended” comes to the
screen,the initial position point needs to be re-selected for calibration.
[Navigation guide]
“Navigation”App is used for robot automatically going to the position point remarked in the map. These points need to be set at “Map” App in advance, please check
“Hit a spot” in [Map] section;
①
Choose the position point, robot will lead you to go there;
②
Press the red button on robot shoulder it will stop navigating, press the green button it will continue to navigate;
③
Click "cancel navigation" to stop the navigation function in the process of leading the navigation. After waiting 5 minutes or 10 minutes without operation, the system
will control the robot to go to the correct area.
④
After the guidance is completed, the robot will automatically return to the starting position point if it waits for a few seconds without any operation.
[Preach]
The "preach" APP allows the robot to show visitors around.
Open “Preach” app,click “click to settings” to configure your preach;
Initialization : Selection the navigation initial position point, the default position is the initial position point selected at startup;
Note : It is recommend to set the the navigation initial position point is same with the reception point;
Single-point setting