Samsung XRN-1610S Скачать руководство пользователя

Страница: 52 / 82

pLAyBACK

play

You can play data stored in the HDD and backup a desired portion of the data.

In the live screen menu, select the <

play

> menu or click on <

> in the launcher menu.

Select a menu for searches.

If this is the first time you try to play, you will start with the data search window.

For data search, refer to "

". (Page 50)

Select a data item and click <

play

> in the Search menu.

The selected data is played and the play launcher appears on the screen.

If there is an existing data, <

Play

> will start immediately without performing the search.

•

Playback Information : Displays the date and time of the current data in the top corner.

•

Backup : Click <

> to set the current time to the start time of backup; you can specify a backup area

using the mouse (yellow triangle).

Click <

> again to set the current time to the end time of the backup and the "

Backup Range

" window

appears.

- Type : Supports formats of NVR and SEC.

When you select the SEC format, you can select or deselect "

Text data included

- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the selected storage device.

If you want to go back to the live screen during plays, then click on <

> of the launcher menu.

Checking menu while playing a video

Right-click on the play screen.

Screen menu appears on the play screen.

Select a menu to run.

For more information about each menu, please refer to the "

Split mode menu

". (Page

)

Rotate mode only appears in single screen mode. You can rotate the play screen by 90 degrees.

using the playback Button

Name

Description

Play Timeline

Indicates the current playback point, and can be used to move.

Skip Backward

Moves backward by unit time.

Backward Fast

Play

Used for quick backward search while in Play.

Backward Slow Play

Used for backward frame-by-frame search while in PAUSE.

Step Backward

Moves backward by one frame at a time.

Pause

Stops playing the current video temporarily.

Stop

Stops playback and moves to the live screen.

Step Forward

Moves forward by one frame at a time.

Forward Slow Play

In a split mode, the real time playback may not be supported, depending on the record quality,

resolution and number of channels. And some frame rates may be supported.

Forward Fast Play

Used for quick forward playback.

Skip Forward

Moves forward by unit time.

Return

Return to the search setup screen.

Audio

Sets Audio ON/OFF.

REC

Records all channels in Live mode.

ZOOM

This is available in Single mode, which will enlarge the video from a selected channel.

To cancel the zooming, simply double-click the enlarged image or select <

Close Zoom

> in the Live

screen menu.

Partial Backup

Begins backup of the selected section of the video being played, with the specified starting/ending

point.

Mode Switch

Click on a desirable play mode to change the screen segmentation mode.

52_

search & play

Содержание XRN-1610S



















































































Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды

Samsung XRN-1610S, Руководство пользователя

Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды